NeoNail - Electric Effect No. 01

ELECTRIC EFFECT GLITTER NO. 01 - Gold-Green-Pink Effect

The Electric Effect collection consists of foil flakes in 3 different shades which shiny, metallic effect on your nails.

Due to the transparent structure of the Electic Effect can be applied to any UV nail polish color.

Decide for yourself how strong the effect should be. Electric Effect can either be applied to selected nail fragments or

rubbed evenly over the entire surface until a shiny surface is created.

There are 2 different application methods.

You create the most spectacular effects on a black background.

 Capacity: 0.3 g

Application on the entire nail surface:

1. Prepare the nails. 2. Thinly apply the UV undercoat HARD BASE as a primer and let it harden under LED or UV light (do not clean the nails afterwards). 3. Thinly apply the UV NAIL POLISH in the color of your choice and let it cure under LED or UV light. Do not clean the nails afterwards. Repeat the process. 4. Thinly apply HARD TOP and allow it to cure under LED or UV light for a very short time (about 10 seconds). 5. Apply the Electric Effect using a suitable applicator. Use a soft brush to remove the excess glittering flakes. 6. Apply the UV HARD TOP for sealing. Application to selected nail fragments:

1. Prepare the nails.

2. Thinly apply the UV undercoat HARD BASE as a primer and let it harden under LED or UV light (do not clean the nails afterwards).

3. Thinly apply the UV NAIL POLISH in the color of your choice and let it cure under LED or UV light. Do not clean the nails afterwards.

4. Thinly apply the 2 coat of UV NAIL POLISH in the color of your choice and let it cure under LED or UV light.

5. Apply the Electric Effect to the selected areas with the aid of a silicone brush on the second (sticky) layer of a colorful UV Nail Polish.

6. Apply the UV overcoat HARD TOP for sealing.

Application to selected nail fragments:

1. Prepare the nails.

2. Thinly apply the UV undercoat HARD BASE as a primer and let it harden under LED or UV light (do not clean the nails afterwards).

3. Thinly apply the UV NAIL POLISH in the color of your choice and let it cure under LED or UV light. Do not clean the nails afterwards.

4. Thinly apply the 2 coat of UV NAIL POLISH in the color of your choice and let it cure under LED or UV light.

5. Apply the Electric Effect to the selected areas with the aid of a silicone brush on the second (sticky) layer of a colorful UV Nail Polish.

6. Apply the UV overcoat HARD TOP for sealing.